Magenn Power Air Rotor System
Magenn Power Air Rotor System
New concept in wind power generation. Floating wind turbines at 1000 feet.
wind | news
Magenn Power Inc are about to start selling their
MARS Wind Power Anywhere wind power generating system. Using a
helium filled balloon to raise a horizontal axis wind turbine to between 600 and 1000 feet, Magenn believe that improved operational performance and greater environmental advantages are possible compared with existing
wind turbine technology.
Being lighter than air, MARS has to be tethered to earth by the cables used to transmit the generated electricity to the ground. Taking advantage of the
Magnus Effect, Magenn believe that the spinning wind turbines will generate lift forces which will keep the balloon stable in a fixed location in the air.
At the target
600-1000 feet level of altitude nocturnal
jet stream winds are found almost everywhere around the world and so commercial
wind power generation could become a practical option where currently it is not.
Operational efficiency will be between 40-50%, far in excess of conventionally located existing wind turbine generators thanks to the relatively constant winds at higher altitudes and the ability to generate power from winds as low as 4mph. Magenn hope this will help its
MARS Air Rotor System become the most cost-effective wind power generation system in the world.
MARS promises to be a very flexible system which can quickly be installed in disaster areas, off-grid locations, and other remote regions. It is a very
mobile system which can be deployed quickly as and when necessary according to wind patterns.
Airship Technology
Being based around existing airship technology it should be cheap to manufacture resulting in reduced costs per Watt of electricity generated over land based wind turbine generators. The
balloon will be woven of a material similar to Kevlar called
Vectran offering the strength of steel.
Power Output Options
Small home-sized 4kW units 39 feet long with a 14 foot diameter are designed to operate at 150-400 feet and will cost under $10,000. A 1kW unit aimed at campers and sailors will be 20 foot long with a diameter of 6.5 feet will float at 50-150 feet and cost around $2,000. Commercial scale turbines will be released in 2009 generating 800kW or 1.6MW from a 200 foot long unit flying at up to 1,000 feet.
Article Last Modified: 16:04, 4th Apr 2007Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
Look Inside a Commercial Wind TurbineLearn how commercial wind turbine generators work
Article Last Modified: 13:24, 31st Jan 2007wind | educationUnder 1000GBP Grid Tied TurbineGrid tied wind turbine generator for under £1000
Article Last Modified: 09:50, 13th Dec 2006windWindmine Personal Wind Power GenerationHave your own 11kW wind turbine generator on a managed windfarm
Article Last Modified: 17:14, 11th Jan 2007news | windWorlds Largest Wind Turbine GeneratorRead about the world's biggest wind turbines - 5MW
Article Last Modified: 14:24, 6th Jan 2007windMicro Wind TurbinesWhat is a Micro Wind Turbine
Article Last Modified: 09:47, 20th Dec 2006windUp Wind or Down Wind GeneratorWhat is the difference between an upwind and a downwind generator?
Article Last Modified: 14:40, 12th Apr 2006windVAWT Vertical Axis Wind TurbineUnderstand the advantages and disadvantages of VAWTs
Article Last Modified: 09:36, 26th Oct 2010windSimple Wind Turbine PlansMake a simple wind turbine with these plans
Article Last Modified: 18:23, 12th Mar 2006windPhotos of PVC Wind Turbine BladesPhotographs of PVC wind turbine blades
Article Last Modified: 13:09, 22nd Dec 2006windChispito DIY Wind Turbine PlansMake a simple, affordable DIY wind turbine generator
Article Last Modified: 14:52, 18th May 2006wind