REUK.CO.UK
The Renewable Energy Website
This is the printer friendly version of the Photos of PVC Wind Turbine Blades article from the Renewable Energy Website REUK.co.uk.

Click here to print this article.

Printed at 07:07am 21st November 2009

Photos of PVC Wind Turbine Blades

Photographs of PVC wind turbine blades


PVC Wind Turbine Blades are a great alternative to expensive and difficult to make DIY wooden blades. Here are some photographs of PVC wind turbine blades currently used on small wind turbine generators around the world. If you would like to find out more about Making PVC Wind Turbine Blades (1) then click here.

PVC blades work very well with most small to medium sized wind turbine generators whether you are using a Stepper Motor (2), Sturmey Archer Dynohub (3), or a larger Permanent Magnet Alternators (4) as your electricity generator.

If you have any photographs of your own PVC wind turbine blades, please email them to us to be added to this selection. Click the REUK link at the bottom of this page for contact details.

PVC Wind Turbine BladeThree bladed design
Three PVC Wind Turbine Blades in actionCarved PVC wind turbine blades
Very large carved PVC bladesVery simple PVC blade construction
Three wind turbine blade design


Web Link References

(1) http://www.reuk.co.uk/PVC-Wind-Turbine-Blades.htm
(2) http://www.reuk.co.uk/Electricity-with-Stepper-Motors.htm
(3) http://www.reuk.co.uk/Sturmey-Archer-Dynohub.htm
(4) http://www.reuk.co.uk/Permanent-Magnet-Generator.htm

Article from REUK.co.uk:
http://www.reuk.co.uk/Photos-of-PVC-Wind-Turbine-Blades.htm
Published: 22nd December 2006
© REUK 2009