Star Delta Wiring Calculator
Star Delta Wiring Calculator
An online calculator to work out the output voltage and current for an alternator wired in star or delta configuration
home > education | wind | electric circuit
In our article Star and Delta Wiring for Alternators we looked at how the multi-phase AC output from an alternator (for wind or hydro power for example) can be connected in Star or Delta configuration to maximise current or voltage.
Here is our online Star/Delta Calculator to help you make the necessary calculations.
Article Last Modified: 22:21, 24th Sep 2014Comment on this Article
If you have any comments on this article, please email them to neil@reuk.co.uk.Related Articles and Products
More from the REUK.co.uk website:| Connecting to Raspberry Pi from PC via SSH Find out how to operate a Raspberry Pi directly from a Windows PC using SSH  | Making Voltage Doublers and Multipliers Find out how to construct an AC voltage doubler circuit. Extend it to a tripler circuit and more.  | Simple Raspberry Pi Relay Control over the Internet Take your first steps in Raspberry Pi home automation - controlling a relay  | How I Built A Wind Turbine Read how a wind turbine was built for under US$150  |
| Butanol vs Ethanol Fuel of the Future A brief introduction to Butanol/Biobutanol as an alternative to Ethanol  | Ohms Law Learn about Ohm's Law and how it is used in Renewable Energy systems  | Easy to Make Thermocouple Thermopile Make your own thermoelectric generator thermopile with paper clips and copper wire  | What is a Thyristor A basic introduction to thyristors (silicon controlled rectifiers)  |
education, wind, electric circuit.