| REUK Shop | REUK Blog | Directory | About Us  |  | RSS Web Feed for Renewable Energy UK 

Review of GutterMate



Review Of GutterMate

A product review of the GutterMate rainwater diverter and filter

water | shopping
  Printer Friendly Version Print Article     

In our article GutterMate Rainwater Filter and Diverter we introduced GutterMate. This affordable device promises not only to divert rainwater to a suitable water butt, but also to prevent the down pipe from getting blocked with leaves and other debris thanks to its filter.

The manufacturers of GutterMate supplied us with a test unit so that we could try the product out ourselves. Handily it arrived just before one of the rainiest starts to the 'summer' since records began!

Installing GutterMate

Installing GutterMate was fairly simple, but it is naturally more complicated than fitting a basic rainwater diverter since it consists of more components and requires more accurate measuring. The written instructions could have been better, but the illustrated installation diagram could not be clearer or easier to understand. With that illustration to hand, installation was completed successfully in around 20-30 minutes.

Square to round adapter for downpipes

If you have a 65mm square downpipe (as we did in our test) the provided square-to-round adapter must be used for the connection between the bottom of the GutterMate and the downpipe. The bottom of GutterMate connects directly to standard 68mm round downpipes.

The tools required for installation are a measuring tape or 300mm ruler, a junior hacksaw for cutting out a section of the downpipe, and a power drill (with 6mm masonary drill bit) and cross head screwdriver for fixing the GutterMate to the wall with the two provided screws and wall plugs.

Click here to download and view the GutterMate Installation Instructions (PDF).

GutterMate Performance

GutterMate performed perfectly throughout the four week testing period. The test location had gutters filled with leaves and other debris etc, and a standard bell type strainer at the top of the downpipe designed to stop blockages. At least once per year it was necessary to climb up a ladder and unblock this strainer to prevent water overflowing from the guttering during heavy rain (since an overhanging tree drops its leaves directly onto the roof). We removed this strainer, but did not clean out the guttering to ensure that plenty of debris would find its way down and into the GutterMate during testing.

GutterMate filter basket

The weather was definitely on our side, with heavy downpours occuring on 3 or 4 days and showery conditions for another whole week. After the first downpour we accessed the filter basket (very easy and no tools required) and found it contained lumps of moss, small twigs, and leaves which had come down the gutters and the downpipe. We threw these on the compost and reinstalled the filter basket. The whole procedure takes under one minute.

We then deliberately filled the filter basket with a large handful of leaves in an attempt to completely block it. With the filter half full, some of the water is diverted to go down the drain (rather than to the water butt). With it completely filled (an unlikely event in real life) all water does down the drain via holes in the top of the filter basket assembly. Therefore, it is unlikely that the filter will ever get so blocked up that the water coming through the downpipe has nowhere to go causing guttering to overflow.

Set up the GutterMate filter basket to send water to drain or water butt

The filter basket also has a secondary role. By rotating it through approximately 30 degrees, you can set up the GutterMate to either send water through the downpipe and directly to the drains (if your water butt is full for example), or send it directly to your water butt. A large (but difficult to see*) arrow is moulded onto the filter basket, and you just rotate the filter so that the arrow points either to THRU (water to drain), or TUB (water to water butt).
* as the filter gets dirty over time, the arrow becomes much more easy to see as dirt sticks to its rough surface and not to the smooth surfaces on the rest of the filter basket.

Overall Conclusions

We found GutterMate to be simple to install, easy to use, and very reliable. It is solidly made and there is no reason why it should not last for many many years - certainly as long as the downpipes it is fitted to. As mentioned below, GutterMate is very cheap for what it is. Being both a rainwater diverter and a filter it saves time and risk since guttering does not need to be cleaned so often, and it saves money as you use less tap water. We are very happy to recommend GutterMate as an excellent product.

Buy a Guttermate

Guttermate is available in the UK selection of online retailers. Best priced (at time of writing) is Ethical Superstore - click here to buy Guttermate now for £22.95.



Article Last Modified: 14:33, 17th Aug 2012

Comment on this Article

If you have any comments on this article, please email them to neil@reuk.co.uk.


Related REUK Categories

water | shopping
© 2006-2013 REUK - All Rights Reserved
Page Last Updated on 17th June 2013 at 08:42:30pm

Recent
Blog Posts


1.Bricking a Beaglebone Black

2.Project of the Day – 12V High Power Regulator with LT1084CP-12

3.Raspberry Pi Temperature Datalogger with DS18B20 Sensor

4.New Raspberry Pi Category on REUK.co.uk Website

5.Special Offer of the Day – 20W PV Solar Panel £25.99

6.Reducing Reflectivity of PV Solar Panels to Increase Efficiency

7.Low Voltage Disconnect with Display and Datalogger

8.Saudi Solar Power Boom About to Begin

9.Compressed Air for Storage of Renewable Energy

10.Offer of the Day – 80W Monocrystalline Solar Panel £71.98


Latest
Articles


Solar Powered Raspberry Pi
Power your Raspberry Pi permanently from a PV solar panel
raspberry pi
20:42, 17th Jun 2013

Beaglebone Black Credit Card Sized Computer
Find out about the Beaglebone Black - tiny, low cost, low power use computer
raspberry pi
15:46, 14th Jun 2013

Power over Ethernet
Find out how to power your networked microcontroller projects directly via the ethernet cable
electronics
17:04, 13th Jun 2013

Raspberry Pi Temperature Logger with Xively
Make a Raspberry Pi temperature data logger accessible online with Xively
raspberry pi
20:44, 12th Jun 2013

DS18B20 Temperature Sensor with Raspberry Pi
Measure temperatures with a 1-wire DS18B20 sensor and Raspberry Pi
raspberry pi
20:37, 12th Jun 2013

Simple Raspberry Pi Relay Control over the Internet
Take your first steps in Raspberry Pi home automation - controlling a relay
raspberry pi
15:57, 6th Jun 2013

Raspberry Pi Flashing LED with GPIO and Python
Find out how to set up Raspberry Pi to flash an external LED using GPIO
raspberry pi
15:57, 6th Jun 2013

Connecting to Raspberry Pi from PC via SSH
Find out how to operate a Raspberry Pi directly from a Windows PC using SSH
raspberry pi
13:08, 5th Jun 2013



REUK Shop

Popular Items


REUK SUPER LDR DUSK DAWN RELAY CONTROLLER
Multi-function light detector triggered light/dark dawn/dusk relay controller
£19.95 each.
Complete Circuits



KARASOULI SCC 20 CHARGE CONTROLLER
20A rated wind turbine charge controller and dump load controller with blocking diode and heatsink
£43.95 each.
Renewable Energy System Parts



2013 SOLAR PUMP CONTROLLER WITH RELAY
New solar water heating pump controller with fitted 10A relay
£25.99 each.
Complete Circuits



REUK SUPER POULTRY LIGHTING CONTROLLER
Control up to 8 Watts of LED spotlights to stimulate egg production in birds
£29.99 each.
Complete Circuits



REUK SUPER TIMER 2
User programmable 12VDC powered 16A rated repeating relay timer. 1 second to 99 hours ON and OFF times
£23.99 each.
Complete Circuits



300 WATT POWER INVERTER
Convert 12V DC battery power into 230 AC to power portable televisions, computers, video recorders etc. 300 Watt power rating - peak power 600 Watts
£29.99 each.
Renewable Energy System Parts



CONVERTED PROGRAMMABLE DIGITAL TIMER RELAY
Mains powered programmable timer converted to low voltage with relay board
£21.99 each.
Renewable Energy System Parts



12 VOLT REGULATOR
Supply a fixed 12.0 Volt DC to your devices (up to 0.7 Amp output)
£4.79 each.
Complete Circuits



MR16 CERAMIC BULB HOLDER
Bulb holder for 12 Volt LED spotlight bulbs
£1.39 each.
Energy Efficient Lighting